Facts About Photo-Chemical Etching from
Precision Photo-Fab

Q: Is it cost effective to run prototypes with the Chemical Milling process?
A: YES!   The cost of prototypes is typically low, compared to other processes.

Q: Can hole sizes, tab widths, and other changes be made easily?
A: YES!  Many changes are often easy to implement.  However, we recommend consulting with us early in the development stage to select the best and most flexible layout. 

Q: Is the same process used to make prototypes and production parts?
A: YES!   We can make one part or one million parts.  You benefit, because we can introduce process variables that may cause production problems and solve them PRIOR to production runs.

Q: Is it possible to achieve "burr free" part without costly secondary operations?
A: YES!   The chemical etching process creates a clean edge eliminating the possibility of burrs on your parts. 

Q: Can design changes or improvements be done without costly fees?
A: YES!  Tooling is very inexpensive.  Therefore, it is very "cost friendly" to make alterations if necessary.  Some design improvements can even be made WITHOUT changing the original tooling.

Q: Can PPFI manufacture my part even if it requires secondary operations?
A: YES!  Precision Photo-Fab has a Secondary Operations Department to handle your secondary requirements

Q: Can PPFI hold the tight tolerances required for my part?
A: YES!  Typically a tolerance of +/- 10% of the material thickness is acceptable.  In some cases, a tighter tolerance can be held to meet your requirements.  Consult with our engineering staff for tighter tolerances.

Q: Will PPFI help with design problems?
A: YES!   Our experienced and knowledgeable staff is always at your service to assist with design issues helping meet your requirement to produce low-cost, high-quality parts!

Q: Is the Chemical Etching process used in my industry?
A: YES!  Several industries have been using Chemical Etching for years.  Several more are beginning to understand the many benefits of switching to this process.  If you have a thin-metal part adaptable to our process, PPFI can supply finished, high quality components to meet your requirements!

Q: Is it easy to contact the experts at Precision Photo-Fab?
A: YES!  Simply call us at 1-800-875-1093 Monday through Friday, 8:00 am – 5:00 pm EST.  Fax us at 716-821-9399, or email us at sales@PrecisionPhotoFab.com.

If you have a part with a drawing ready to go, you can even complete our inquiry form to receive a quote ASAP!

THE BOTTOM LINE IS…

When in doubt, contact Precision Photo-Fab first! Our friendly and experienced staff is here to help!